Custom Outdoor Furniture Covers Made to Measure

Protect your garden furniture with custom outdoor furniture covers manufactured to your measurements. Whether you need a cover for a garden dining set, outdoor sofa, patio table, bench, chair or unusually shaped item, you can select the closest matching design and provide the dimensions needed to create your cover.

Standard outdoor furniture covers are normally produced in a limited selection of sizes. This can result in excess material, exposed sections, loose corners or a cover that does not reach the bottom of the furniture. A made-to-measure cover provides a more suitable fit for the individual shape and dimensions of your furniture.

Our collection includes simple rectangular and circular covers as well as designs for L-shaped, U-shaped, oval, curved, high-back, tapered and irregular furniture.

Custom Covers for Different Types of Outdoor Furniture

Outdoor furniture is available in many different dimensions and arrangements. That is why this collection is organised by shape rather than by one fixed furniture size.

Our custom outdoor furniture covers can be made for:

• Garden dining tables and dining sets
• Outdoor sofas and couches
• L-shaped and corner sofas
• Modular garden seating
• Rattan furniture sets
• Patio tables and coffee tables
• Garden benches
• Outdoor chairs
• Sun loungers and daybeds
• Storage benches and furniture boxes
• Circular and oval tables
• High-back chairs and seating
• Unusual or bespoke garden furniture

Start by choosing the product shape that most closely resembles the item you need to protect. Each product page includes the measurements required for that particular design.

Made-to-Measure Outdoor Furniture Covers

A custom cover is produced using the measurements supplied when ordering. This makes it suitable for furniture that is difficult to cover using standard off-the-shelf sizes.

Made-to-measure outdoor furniture covers are especially useful when:

• The furniture is unusually wide, tall or deep
• A sofa has an L-shaped or U-shaped layout
• The furniture has a sloping or high back
• The top is narrower than the base
• The item has rounded or curved corners
• Several pieces are being covered together
• A parasol hole or other opening must be considered
• Standard furniture covers are consistently too large or too small

A closer fit can also give the covered furniture a neater appearance when it is not being used.

Shapes Available

Rectangular and Square Covers

Rectangular covers are suitable for many common outdoor items, including garden tables, benches, storage boxes, dining sets and straight outdoor sofas.

This is usually the simplest option when the furniture has four straight sides and a level top.

Circular and Round Covers

Circular covers can be used for round garden tables, circular seating arrangements and other cylindrical outdoor furniture.

Measure the diameter across the widest point as well as the total required height.

Oval Covers

Oval covers are intended for furniture with rounded ends, including oval dining tables and certain curved seating arrangements.

Because oval furniture can vary significantly in proportion, accurate length and width measurements are important.

L-Shaped Covers

L-shaped custom outdoor furniture covers are commonly used for corner sofas and modular patio seating.

These designs normally require several separate measurements to account for both sections of the furniture.

U-Shaped Covers

U-shaped covers are suitable for larger modular seating arrangements and furniture that surrounds a central table or open area.

Check the measurement diagram carefully before ordering, as each section of the U-shape may require its own dimensions.

High-Back and Sloping Covers

High-back covers are suitable for chairs, loungers and sofas where the rear section is taller than the front.

Sloping and tapered designs can also help match furniture that changes in height or width from one side to another.

Curved and Irregular Covers

Curved, kidney-shaped, trapezoidal, wedge and other specialised designs are available for furniture that cannot be represented by a basic rectangle or circle.

Where the shape is particularly unusual, photographs and additional measurements can help clarify the required design.

Waterproof Outdoor Furniture Protection

Outdoor furniture is regularly exposed to rain, dirt, bird mess, falling leaves, frost and sunlight. A suitable cover helps reduce direct exposure while the furniture is not being used.

Our custom outdoor furniture covers are made using outdoor cover materials selected for weather protection and everyday garden use.

For the best performance:

• Choose a material appropriate for the furniture’s location
• Make sure the measurements allow the cover to fit correctly
• Select suitable fastening options for exposed or windy areas
• Avoid allowing large amounts of water to collect on flat surfaces
• Remove standing water when necessary
• Allow suitable airflow around furniture that may hold moisture

No cover can compensate for poor drainage or permanently trapped moisture, so the furniture and cover should be checked periodically.

Material Options

PVL

PVL is a practical waterproof material suited to general outdoor furniture protection and more sheltered locations.

It is lighter and easier to handle, making it convenient for furniture that is uncovered and recovered regularly.

P500UV

P500UV is the heavier-duty option for furniture that requires stronger protection from regular outdoor exposure.

It is better suited to open gardens, patios and locations where increased durability and UV resistance are priorities.

The material options available for each design are shown on the individual product page.

Optional Features and Fastenings

Depending on the selected cover design, available options may include:

• Drawstrings
• Elasticated hems
• Buckle straps
• Air vents
• Reinforced areas
• Parasol openings
• Additional openings or cut-outs
• Alternative finishing requirements

Fastenings are particularly important in exposed gardens or areas where wind may travel underneath the cover.

Choose the options shown on the product page or provide further details where the furniture requires something more specific.

How to Measure Outdoor Furniture for a Custom Cover

Always measure the furniture itself rather than an old cover.

1. Identify the basic shape

Decide whether the furniture is rectangular, circular, oval, L-shaped, U-shaped, sloping or another listed design.

2. Follow the relevant diagram

Each product shape has its own measurement diagram. Follow the letters and directions shown rather than assuming every cover requires only width, depth and height.

3. Measure the widest points

Include projecting arms, handles, feet or other permanent parts that the cover must pass over.

4. Measure the required height

Decide where the bottom of the cover should finish. The cover does not always need to touch the ground, particularly where some airflow underneath is preferred.

5. Check every measurement again

Measure twice before submitting the order. Custom products are produced using the dimensions supplied, so accuracy is important.

6. Provide photographs where useful

Photographs taken from the front, side and above can help illustrate complicated shapes. Images do not replace the required measurements, but they can provide useful context.

One Large Cover or Separate Covers?

Some garden furniture sets can be covered using one large cover, while others are better protected individually.

One large cover may be convenient for a compact dining set where the chairs fit closely around the table. Separate covers may be more suitable when:

• Furniture pieces are moved regularly
• Large gaps exist between the items
• The arrangement changes frequently
• The combined shape would create deep unsupported areas
• Water could collect between furniture pieces

Consider how the furniture is normally arranged and how often you need to access individual items.

Why Choose Custom Outdoor Furniture Covers?

A More Suitable Fit

The cover is based on the measurements of your furniture rather than a limited standard size.

Options for Unusual Shapes

Corner sofas, high-back seating, curved tables and modular furniture can require more than a simple rectangular cover.

Choice of Materials

Select the material according to the furniture’s location, exposure and expected level of use.

Custom Finishing Options

Fastenings, vents and other available additions can be selected according to the design.

Suitable for Premium Furniture

Custom covers can be particularly useful for expensive, oversized or discontinued furniture that would be difficult to repair or replace.

Ordering Your Custom Outdoor Furniture Cover

1. Select the cover shape that most closely matches your furniture.
2. Review the measurement diagram on the product page.
3. Enter each requested dimension carefully.
4. Choose the material, colour and available fastening options.
5. Upload photographs or add notes where the shape needs further explanation.
6. Check all details before placing the order.

Where you cannot find a suitable shape, contact us with photographs and measurements so the design can be reviewed.

Frequently Asked Questions

What are custom outdoor furniture covers?

Custom outdoor furniture covers are manufactured using dimensions provided for a particular item or furniture arrangement. They are intended for furniture that requires a more specific fit than standard-size covers can provide.

Are your custom outdoor furniture covers waterproof?

The materials offered for these covers are intended for outdoor protection and include waterproof options. Performance also depends on correct measurements, suitable seams, fastening choices, drainage and how the cover is used.

What furniture can be covered?

Covers can be made for garden tables, chairs, benches, outdoor sofas, corner sofas, dining sets, rattan furniture, loungers, daybeds and many other outdoor items.

Can you make a cover for an L-shaped outdoor sofa?

Yes. Select the L-shaped design and follow its individual measurement diagram. Several dimensions are normally required to represent both sections accurately.

Can you cover an entire garden dining set?

In many cases, yes. The table and chairs can sometimes be covered together using one larger cover. However, separate covers may be more suitable where the arrangement creates large gaps or unsupported sections.

Can you make covers for unusual furniture shapes?

Yes. This collection includes curved, tapered, wedge, oval, trapezoidal and other specialist designs. For highly unusual furniture, send photographs and measurements before ordering.

Should I add extra centimetres to my measurements?

Follow the instructions provided on the relevant product page. Do not add an arbitrary allowance unless the measurement guide specifically asks for it, as the required production allowance may already be considered separately.

How do I stop an outdoor furniture cover blowing away?

Choose an appropriate fastening option, such as straps, an elasticated edge or a drawstring where available. A suitable fit also reduces the amount of loose material that wind can catch.

Can a cover prevent water pooling?

A well-fitted cover can reduce loose areas, but water may still collect on wide, flat or unsupported surfaces. Where necessary, create a slight raised point beneath the cover so water can run away rather than settle in the centre.

Should outdoor cushions remain under the cover?

This depends on the cushion material, the level of ventilation and weather conditions. During extended wet periods, cushions are generally better stored somewhere dry rather than enclosed while damp.

How do I clean the cover?

Remove loose dirt with a soft brush or damp cloth and follow the care guidance provided for the selected material. Avoid strong chemicals unless they are confirmed as suitable for the fabric.

Can I order a replacement cover using an old cover as the template?

It is better to measure the actual furniture. An old cover may have stretched, shrunk or originally been made with different allowances.

What happens if I choose the wrong shape?

The selected shape determines how the cover is manufactured. Compare your furniture carefully with the diagrams before ordering. Contact us before purchase where you are uncertain.

Can I send photographs of my furniture?

Yes. Photographs can help show the overall shape and any unusual details, although all required measurements must still be supplied.

Are made-to-measure covers returnable?

Custom-made products are produced using customer-supplied specifications and may be subject to different return conditions from standard products. Review the current returns policy before ordering and contact us before purchase where clarification is required.

Explore Related Custom Covers

Looking for protection for something other than garden furniture? Browse our wider range of custom covers for BBQs, outdoor kitchens, equipment and other outdoor items.

For furniture-specific options, explore the available rectangular, circular, oval, L-shaped, U-shaped, curved and high-back cover designs above.